The basic methods use a distance (ATR, percentage). The advanced methods place the stop and targets on landmarks read from the chart. This lesson describes, with default settings, what each of the ten really does. All are aids: none has a proven edge.
Bands, zones and patterns
- Bollinger bands (boll): SL at 1.5 ATR from entry. TP1 at the middle band and TP2 at the outer band on the trade’s side (adjustable: TP1 on the outer band, TP2 at 2 times TP1’s distance). If price is already outside the bands, it falls back to ATR.
- Supports and resistances (sr): SL behind the nearest zone (below a support for a buy) with a 0.5 ATR margin; TP1 at the edge of the first opposing zone; TP2 extends TP1 by one times its distance. Without a zone, SL and TP1 at 1.5 ATR.
- Zones (zones): same principles using order-block zones and liquidity-sweep levels. SL behind the nearest zone (0.5 ATR margin); TP1 and TP2 at the next two zones in the trade’s direction, or as multiples of risk if they are missing.
- Harmonic (harmonic): SL 1 ATR beyond the pattern’s anchor point; TP1 at 38.2% and TP2 at 61.8% of the way back toward point A. Only applies when a pattern is active, otherwise falls back to ATR.
Computed levels
- Pivots (pivots): levels from the previous period (central pivot, CPR edges, R1 to R3, S1 to S3, Camarilla H3, H4, L3, L4). SL behind the nearest protective level minus 0.25 ATR (if that stop is between 0.5 and 3 ATR, otherwise 1.5 ATR); TP1 and TP2 on the next levels in the trade’s direction, otherwise as multiples of risk (1.5 and 2.5).
- Fibonacci extensions (fibext): the range between the highest high and lowest low of the last 30 candles is measured. SL beyond the extreme (0.3 ATR margin); TP1 at 0.618 times that range from entry and TP2 at 1.272 times.
- Structure (structure): strength-3 pivots over the last 60 candles. SL behind the most recent protective pivot (0.3 ATR margin); TP1 and TP2 on the next opposing pivots in the trade’s direction, otherwise as multiples of risk (1 and 2).
Stops that follow the market
- Chandelier (chandelier): SL at 3 ATR from the highest high (buy) or lowest low (sell) of the last 22 candles; TPs as multiples of risk (1 and 2). Inspired by the “chandelier exit” that lets a trend run.
- Moving-average stop (mastop): SL on the other side of a 50-candle exponential moving average, minus 0.5 ATR; TPs as multiples of risk (1 and 2). If price is on the wrong side of the average, it falls back to ATR.
- Exit average (exitma): SL at 3 ATR. TP1 and TP2 are indicative prices where a smoothed 100-candle average would reach levels 50 and 70 of the 10-90 scale (computed over 330 candles; symmetric for a sell). These prices are estimates.
The safeguards
For nine of these methods (not exitma), a consistency check applies by default: the stop must be on the losing side; TP1 is at least 1 times the risk and TP2 at least 2 times (the TP is pushed out if too close, or, in mode 2, the stop is tightened without going below 0.5 ATR); an optional cap limits the stop to a number of ATR. Without these safeguards, a badly placed level would give a target closer than the stop.
📝 Lesson test
Log in to take this lesson’s test. Once you have passed all the tests, you will receive a certificate in your name.
Log inThese lessons are for understanding and are not investment advice. No method guarantees winning.